Feathers
High Accuracy
Long working life
Acid Resistance and Alkali resistance
with LCD display

Specification
Set Point Range: 0~600Bar
Adjustment: Touch button set
Cable connection: Size M18x1.5 (with a tighten sleeve)
Pipe connection: G1/4" Female (typical)
Accuracy: Less than 0.1%
Burst Pressure: ≤ 200%
Power supply: DC 24V or AC 220V
Power consumption: ≤ 5W
Lifetime at rated load: 1x106
Weight: 0.75kg/PC

[EXAMPLE]: Range from 0~1MPa, the Up Set-point is required to be 0.65MPa, the Down Set-point is required to be 0.42MPa, please see the followings:
Step 1: Press " SET" button, there will be three words appear on the top of screen, " Upper Limit", "Lower Limit", "Exit", and word "Upper Limit" is twinkling.
Step 2: Press "ENTER" button, it will appear "88.88" at the bottom of screen, and the first "8" is twinkling, press " ", the twinkling "8" will become "0"
Step 3: Press " ", the second "8" will twinkle, press " ", until the "8" become " 0".
Step 4: Press " ", the third "8" will twinkle, press " ", until the "8" become " 6".
Step 5: Press " ", the last "8" will twinkle, press " ", until the "8" become " 5".
Step 6: There will be a value "00.65" displayed on the bottom of screen, press " ENTER", the "Upper Limit" on the top will twinkle.
Step 7: Press " ", the " Lower Limit" which on the top of screen will twinkle, pressure " ENTER", thus to set up the "Lower Limit"
Step 8: Repeat Step 3 four times, until there is a value "00.42" displayed at the bottom of screen, press "ENTER", at the same time, " Lower Limit" will twinkle.
Step 9: Press " ", "Exit" will twinkle on the top of screen, press "ENTER", finish the setting.

Single Set-point

[EXAMPLE]: Range from 0~1MPa, the Set-point is 0.65MPa, please see the followings:
Step 1: Press " SET" button, there will be three words appear on the top of screen, " Upper Limit", "Lower Limit", "Exit", and word "Upper Limit" is twinkling.
Step 2: Press "ENTER" button, it will appear "88.88" at the bottom of screen, and the first "8" is twinkling, press " ", the twinkling "8" will become "0"
Step 3: Press " ", the second "8" will twinkle, press " ", until the "8" become " 0".
Step 4: Press " ", the third "8" will twinkle, press " ", until the "8" become " 6".
Step 5: Press " ", the last "8" will twinkle, press " ", until the "8" become " 5".
Step 6: There will be a value "00.65" displayed on the bottom of screen, press " ENTER", the "Upper Limit" on the top will twinkle.
Step 7: Press " ", the " Lower Limit" which on the top of screen will twinkle, pressure " ENTER", thus to set up the "Lower Limit"
Step 8: Repeat Step 3 four times, until there is a value "00.00" displayed at the bottom of screen, press "ENTER", at the same time, " Lower Limit" will twinkle.
Step 9: Press " ", "Exit" will twinkle on the top of screen, press "ENTER", finish the setting.